induction heating
Call (818)244-4540

      Products             Contact Us      

Rectifier Diodes
FAST RECOVERY HOCKEY PUCKS

 

PRODUCTS

Rectifier Diodes

Standard Recovery Studs
Standard Recovery Hockey Pucks
Standard Recovery Modules
Fast Recovery
Studs
Fast Recovery
Hockey Pucks
Fast Recovery Modules
Thyristors (SCR)
Phase Control
Studs
Phase Control
Hockey Pucks

Phase Control
Modules

Inverter Grade
Studs
Inverter Grade
Hockey Pucks
Bridges
Single Phase Diodes

Three Phase Diodes

Three Phase Thyristor
IGBT
Discreet 600 volt
Discreet 1200 volt
Discreet Co-Pak
600 volt
Discreet Co-Pak
 1200 volt
Module 600 volt
Module 1200 volt
Selenium Rectifiers
Introduction
Stack Assemblies
Individual Cells
Selenium Suppressors
Introduction
Charts
Assemblies
(Air  cooled)
Diode Bridge
Single Phase
Diode Bridge
Three Phase
Thyristor Bridge
Single Phase
Thyristor Bridge
Three Phase
Thyristor Bridge
Three Phase
Bi-Directional
AC Switch
 Single Phase
AC Switch Three Phase
AC Switch Three Phase
AC-DC Switch
Three Phase
Assemblies
 (Water cooled)
Diode Bridge
Single Phase
Diode Bridge
Three Phase
Thyristor Bridge
Single Phase
Thyristor Bridge
Three Phase
AC Switch
Single Phase
AC Switch
Single Phase
AC Switch Three Phase
Heat Sinks
Extruded
Heat Sinks
Bonded Fin
Heat Sinks
Clamps
Product List
General Information
Insulators
Mounting Directions
Power Semiconductor Tester  Model M3K
Induction
Heaters
 

Part Number

VRRM
(V)

IFAV
(A)

TC
(C)

IFSM
60Hz
(A)

VFM
(V)

@IFM
(A)

RoJC
(C/W)

trr
(nS)

Notes

 

Hockey Puck Packages

DO-200AA (A-Puck)
SD303C20S20C 2000 350 55 5080 2.26 1100 0.08 2000 4  11  12
SD303C25S20C 2500 350 55 5080 2.26 1100 0.08 2000 4  11  12
SD403C08S10C 800 430 55 5445 1.83 1350 0.08 1000 4  11  12
SD403C12S15C 1200 430 55 5445 1.83 1350 0.08 1500 4  11  12
SD403C16S15C 1600 430 55 5445 1.83 1350 0.08 1500 4  11  12

B-43 (E-Puck)

SD823C12S20C 1200 810 55 8190 2.20 1500 0.038 2000 11 15 19
SD823C16S20C 1600 810 55 8190 2.20 1500 0.038 2000 11 15 19
SD823C20S20C 2000 810 55 8190 2.20 1500 0.038 2000 11 15 19
SD823C25S20C 2500 810 55 8190 2.20 1500 0.038 2000 11 15 19

DO-200AB (B-Puck)

SD553C30S50L 3000 560 55 10570 3.24 1500 0.031 5000 11 15 18 19
SD553C36S50L 3600 560 55 10570 3.24 1500 0.031 5000 11 15 18 19
SD553C40S50L 4000 560 55 10570 3.24 1500 0.031 5000 11 15 18 19
SD553C45S50L 4500 560 55 10570 3.24 1500 0.031 5000 11 15 18 19
SD703C12S20L 1200 700 55 8190 2.20 1500 0.046 2000 11 15 19
SD703C16S20L 1600 700 55 8190 2.20 1500 0.046 2000 11 15 19
SD703C20S20L 2000 700 55 8190 2.20 1500 0.046 2000 11 15 19
SD703C25S20L 2500 700 55 8190 2.20 1500 0.046 2000 11 15 19
SD1053C18S20L 1800 1050 55 13210 1.90 1500 0.031 2000 3  5
SD1053C25S20L 2500 1050 55 13210 1.90 1500 0.031 2000 3  5
SD1053C30S30L 3000 920 55 11450 2.26 1500 0.031 3000 3  5

DO-200AC (K-Puck)

SD853C30S50K 3000 990 55 16750 2.90 2000 0.02 5000 11 15 18 19
SD853C45S50K` 4500 990 55 16750 2.90 2000 0.02 5000 11 15 18 19
SD1553C18S20K 1800 1825 55 22010 2.23 4000 0.02 2000 11 15 19
SD1553C25S20K 2500 1825 55 22010 2.23 4000 0.02 2000 11 15 19
SD1553C30S30K 3000 1650 55 19370 2.60 4000 0.02 3000 11 15 19

Notes:

1.2 IFM=20A, -di/dt=100A/s
1.6 IFM=60A, -di/dt=100A/s
1.8 IFM=80A, -di/dt=100A/s
2     For ifsm: 100% VRRM reapplied, Tj=Tj max.=125C
3     trr conditions: Tj = 25C, IFM = pi X rated IF(AV), diF/dt = 25A/s.
4   VFM measured at Tj= 25C
5 Cathode to stud. To order anode to stud, add 'R' to part number (e.g. IRD3899R, 40HFLR10502)
8   VFM conditions: IFM = 60Apk, Tj=25C
9 IF(AV) conditions: 180C conductions, half sine
10 Tj = 25C, IF=1A, -di,dt = 100A/s, VR=30V
11 For lfsm: 100% VRRM reapplied, Tj=Tj max.
12 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (e.g. SD103R04S10PV)
14 Available with flag lead. To order, add B to part number, (e.g. SD103NOS10PBV)
15 For trr: Tj=25C
18 IFSM @ 50% VRRM re-applied and Tj=Tj max
19 VFM measured at Tj = Tj max.